Downloadable brochures and spec sheets for current and non-current models are here.
Solutions to Productive Recycling of Waste Lumbers, Plants and Branches
Charge Feeder
Charge feeder speed can be adjusted depending on the nature of materials to be disposed.
Compression Feeder
The compression feeder interact with the charge feeder to smoothly deliver materials to the crushing chamber.
Shear Pin
The shear pin will be shorn when subjected to excessive impact due to caught stones or metal pieces. At this time, the anvil frame opens, and all operations shut down. Notice that the shear pin may not always be broken
sometimes depending on size and conditions of caught materials.
Magnetic Separator
Allows automatic picking-up of nails and metal pieces from chips.
Main Control Panel
Allows easy operation while standing on the ground beside the machine.
Track-Type Undercarriage
Self-propelling for quick job-to-job travel at worksite
Efficient, Reliable Crushing Mechanism
(Primary Crushing)
Efficient crushing with bits on crushing rotor: The charge feeder delivers dumped materials while being held securely with the compression feeder.
Less chips fly out during crushing: Material to be crushed is enclosed to prevent loose chips flying up.
Staggered Bit Arrangement for Concentrated Loading
High dumping efficiency with concentrated loading through staggered bit arrangement.
Double-edged bits are reversible.
Advanced Crushing Mechanism
The newly designed hydraulic system yields plenty of power to the crushing rotor for powerful crushing.
The auto power boost mechanism surges the power when sensing a heavy load. This helps reduce fuel consumption and emissions.
The auto lumber feed system prevents excess feed and overload to the crushing chamber. In the case of overloading, Compression Feeder and Charge Feeder are automatically reversed to stop feeding, and restart when the load is reduced.
The Material Selector can be switched to any arbitrary overload time depending on the nature of materials to reduce downtime.
Easy Loading
The side-feeding type hopper facilitates the loading of long materials.
Hopper height is a mere 1 840 mm, so the inside of the hopper is easily visible for dependable loading.
Fine Crushing with Anvil (Secondary Crushing)
High-speed flying chips from the crushing rotor are further struck against the anvil for finer crushing.
An Assortment of Screens
Crushing chips can be sorted by the selection of screens.
Pictured is chips sorted with a 2-inch grading screen. Chip size may vary depending on the nature of materials.
Simplified Maintenance
The screen can be replaced in a short time, using the hydraulic screen guide and side-loading type screen mechanism.
The hopper bottom can be hydraulically opened for easy cleaning.
The hopper bottom can be opened by the pendant switch as shown in the insert.
小小見出し The hopper bottom opens wide for easy bit replacement.
Environmently Low Ecological Impact Design
Environmently Low Ecological Impact Design
The full cover at the discharging belt conveyor can prevent crushed objects and debris from flying out.
